Thom's Four Wheel Drive

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now? Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick. There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You ... read more

Have you ever driven a vehicle without power steering? If you have, then you probably appreciate how much easier it is to drive today's modern vehicles. Before power steering, all of the force to turn a vehicle had to come from the driver's arms. That's why old cars had such large steering wheels: they needed plenty of leverage to steer. There were some CHICAGO folks who had difficulty driving because they just weren't strong enough.Power steering is now standard on all vehicles, but there are several ways that power can be delivered. Most vehicles use a hydraulic power steering system system. In this system, a serpentine belt from the engine powers a pump that pressurizes the power steering fluid. The pressure activates hydraulics that provides steering power.Other vehicles use an electric pump to pressurize the power steering fluid rather than the belt-driven pump. Some newer vehicles actually have electric motors that provide steering power and don't use steering fl ... read more

You've likely heard how important oil is to your vehicle's engine. Did you know that there's one part that's responsible for holding that oil so you can use it every day? It's called the oil pan, and it sits at the bottom of the engine. The oil pan is a vital, though simple, part of your engine's lubrication system. Oil circulates through parts of your engine to keep them lubricated. It reduces friction so everything works smoothly. Without oil, friction would quickly destroy your engine. The oil pan keeps that oil contained in the lubrication system, so it's important that the oil doesn't leak out. Since it's a metal part attached to another metal part, there is a gasket between the oil pan and the part of the engine it attaches to. Various things can put stress on the oil pan and gasket, including weather extremes, the speed you're traveling and the condition of the oil. You may drive over a couple of bad roads and kick up debris onto your oil pan. All this wear and tear, heat and ti ... read more

  Today we're talking to CHICAGO drivers about shocks and struts. They're so easy for Illinois folks to forget about because they last so long and wear out so slowly. But your shocks are really responsible for keeping your tires on the road – so they're very important.Without shocks, your wheels would be bouncing over bumps and lifting on corners. The shocks push the tire down to the road to maximize traction. Good shocks equal good ride quality and safe handling for CHICAGO drivers. There's a difference between shocks and springs. Springs support the weight of the vehicle, keeping it suspended up off the axles. The shocks moderate the rebound motion as wheels hit bumps. Now a strut combines a shock and a coil spring in one compact unit. It's best to replace all four shocks at the same time. That way you'll have even, predictable handling at all four corners. Anything less could be dangerous. Visit Thom's Four Wheel Drive to have you ... read more